All You Need To Know About Insertion Flow Meter

Recently, more and more customers are interested in our insertion type electromagnetic flow meter and purchased it from us.

The DFDS-YIGD Insertion electromagnetic flowmeter is a new type of flow meter developed on the basis of the pipeline electromagnetic flowmeter. It retains the advantages of the pipeline electromagnetic flowmeter and aims at the pipeline electromagnetic flowmeter on the pipeline. Difficult installation, high cost and other defects. According to the principle of NIKURADS, the average flow rate of the fluid is measured by electromagnetic method to obtain the volume flow of the fluid. Especially after the use of pressure tapping and pressure installation technology, the insertion electromagnetic flowmeter can be installed without stopping the water, and can also be installed on cast iron pipes and cement pipes.

In pipeline inspection, the plug-in electromagnetic flowmeter is simple to install and can flow continuously. It has absolute installation advantages and price advantages. It is suitable for the flow detection of water, sewage, acid, strong alkali and other liquids with conductivity above 20us/cm.

It widely used for large pipe diameter, if the diameter of your pipeline is over DN150mm, insertion type is a good choice for you, convenient transportation, high price-performance ratio, the price is more competitive than the flange type electromagnetic flow meter.

Our video of how to install the insertion type flow meter for your reference.

https://youtu.be/FAya9rzAXTs

Some shipment pictures about insertion flowmeter,

Insertion flowmeter have the diameter of DN100~3000mm, if there is any needs, please leave your comments or contact us to get more details, our specialist team will reply you within 2 hours after received your inquiry.

From: Lin Xing